-
I have a working implementation of the parameter server with 4 parameters, and I was trying to add two more. However, when I try with 6 parameters, the client goes into the RCCHECK error loop. I remov…
-
Is Teensy 4.0 supported?
-
Hi,
I bought the sensor on tindie and
I succeeded to get the sensor to work with arduino uno but couldn't make it work with teensy 3.2.
The led doesn't even lit.
The serial monitor shows :
Uplo…
-
Since Teensy 3.2 is unavailable for a long time it would be possible to use it Teensy 4.0 or another board?This is a very nice project but currently without usable hw.
-
Hello,
I absolutely love this project, but I cannot finish it because it requires a teensy 3.2 and they wont be back on the market for quite some time.
I was wondering if there's any possibili…
-
Teensy package version `1.59.0` patches an issue concerning the ability to see environmental sensors. See https://forum.pjrc.com/index.php?threads/bme280-sensor-not-being-seen-what-so-ever-by-teensy-4…
-
I cannot get this library to work with the Pubsubclient library to connect to MQTT over ethernet. I used the example from pubsubclient and replace Ethernet.h with NativeEthernet.h. Is there anything m…
-
Do you think it's relatively straightforward to add support for the Teensy 3.2?
I see this library supports Teensy 2.0 and Teensy ++2.0 already. What did you need to know about the boards in order …
-
Hallo TSynth. Nice projekt :)
But i have a problem with envelope.delay funktion in exp. envelope. If I set envelope.delay to 6ms and play more notes, the envelope freezes. With 0ms delay, the envelo…
-
@valeros / @ivankravets Avrdude now supports the AVR Teensy bootloader using `-c teensy`. Even though you may prefer to use the "official" teensy upload tool for PlatformIO, it would still be very use…