-
Seems that [micronucleus supports attiny2313](https://github.com/micronucleus/micronucleus/blob/master/firmware/configuration/t4313_default/bootloaderconfig.h), but it's not possible to upload firmwar…
-
So I have some code that was compiling and uploading just fine a few days ago. I was using an older version of the core where pyupdi upload was really slow. Updating to the newest version of the core …
-
in the Spencekonde AtmegaTiny core it is possible to program the Attiny0,1 and 2 Series with PYupdi just using a serial adapter and a single resistor. This words fine, even for the DX cores. It should…
-
Interrupt not work.
Tiny85
Button on PB0 (Work on polling)
attachInterrupt(digitalPinToInterrupt(0), VoidInt, RISING);
attachInterrupt(0, VoidInt, RISING);
attachInterrupt(digitalPinToInterru…
-
https://github.com/SpenceKonde/megaTinyCore/blob/a4d80aefb68756921082154f58ea81e3dfbad84f/megaavr/variants/txy4/pins_arduino.h#L44
Doesnt match https://github.com/SpenceKonde/megaTinyCore/blob/mast…
-
Hi,
First of all thanks for your work on this! After a bit of struggling I could get a GDB server starting. (I did not have hidapi installed! `sudo apt install libhidapi-hidraw0 libhidapi-libusb0`)…
-
## System:
**OS:** Ubuntu 22.04 LTS x86_64
**Kernel:** 5.17.8-051708-generic
**IDE:** 1.8.19 (This IDE version works on mac and win)
## Issue:
Upload failure.
Guessing yaml lib is the culpr…
-
With release 2.3.0, https://github.com/SpenceKonde/megaTinyCore supports the new TinyAVR series.
How can we get this in PIO?
-
I have a problem with a library I use for the MCP2515 SPI CAN controller IC. It has worked on every other core I've thrown it at (AVR, Tiny, Arm, Pico, ESP, etc) but I get a hang with DxCore. The libr…
-
On MegaTinyCore you can run millis() on the RTC which keeps time while asleep. It also can be made more accurate with a crystal.
It seems like this isn't supported on DxCore?
TCB2.CTRLA |= 1