-
`update_sbu.py ` switched the uart path to programming
```py
base@bananapi:~$ sudo python3 python.base/sbu_fw_files/update_sbu.py
base@bananapi:~$ sudo pyupdi -d tiny816 -c /dev/ttyS1 -f /home/b…
-
Hello, I've been using an mh-tiny88 board for quite some time, it's a perfect board for classic projects, without serial port. I saw that it was possible to use it as a HID device, I created this code…
-
Thu 30 Nov 2017 05:32:48 PM UTC
Chip erase on devices with UPDI is done by setting a special parameter before entering prog mode. This patch fixes that.
[file #42535: fix-updi-chiperase.patch](https…
-
Fun fact of the day about the flash pagesize of `ATtiny20`
- ATDF puts a value of 128 on this
- Avr-libc's `iotn20.h` defines SPM_PAGESIZE as 64
- Page 160 of [datasheet](https://ww1.microchip.c…
-
This error happens if you do both `#include ` and `#include ` in the same `.cpp` (or `.ino`) file.
Here is the error in more detail:
```
In file included from mytest.ino:2:0:
.../MegaCoreX/har…
-
Interrupt not work.
Tiny85
Button on PB0 (Work on polling)
attachInterrupt(digitalPinToInterrupt(0), VoidInt, RISING);
attachInterrupt(0, VoidInt, RISING);
attachInterrupt(digitalPinToInterru…
-
Hi,
First of all thanks for your work on this! After a bit of struggling I could get a GDB server starting. (I did not have hidapi installed! `sudo apt install libhidapi-hidraw0 libhidapi-libusb0`)…
-
So I have some code that was compiling and uploading just fine a few days ago. I was using an older version of the core where pyupdi upload was really slow. Updating to the newest version of the core …
-
in the Spencekonde AtmegaTiny core it is possible to program the Attiny0,1 and 2 Series with PYupdi just using a serial adapter and a single resistor. This words fine, even for the DX cores. It should…
-
https://github.com/SpenceKonde/megaTinyCore/blob/a4d80aefb68756921082154f58ea81e3dfbad84f/megaavr/variants/txy4/pins_arduino.h#L44
Doesnt match https://github.com/SpenceKonde/megaTinyCore/blob/mast…