-
The values are listed as 11.7 and 12.3. They should calculate out to 6.0 and 6.3. I'm not sure the values are the same for 1E and Husky.
-
_From @hartytp on [2017-08-16 05:24](https://github.com/sinara-hw/sinara/issues/253)_
I've started sketching out requirements for a fast DAC to be used for ion shuttling/splitting. It's on the [Wiki…
-
https://github.com/m5stack/M5Stack/blob/4b7b423b302cc7382280c826f089d7aa09cf9142/src/utility/Power.cpp#L99
This is setting the boost enable bit (5), not the auto load bit (2).
Reference sheet [h…
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…
-
`Experimental Build 0.C-6235 Windows 7 SDL`
Right now, vehicle-based UPS-Compatible Recharging Stations are woefully inefficient. Whereas most power transfers to or from UPS (bionic or otherwise) o…
Nioca updated
4 years ago
-
Hi,
In installed the latest 2.06 firmware onto my ts100. I upgraded from the official 2.18 firmware.
The first thing I noticed is that the main screen flickers twice before settles whenever the so…
-
I built a streaming software using AMF VCE to do the encoding part. Initially, I use Low Latency mode with quality setting. I got perfect screen quality and 16 ms average encode latency.(I am sure abo…
-
Board|MCU|State|To-Do
-|-|-|-
8-Bit AVR boards, RAMPS, etc.|Arduino AVR|💚good|
Due, RAMPS FD (v2.A!), etc.|SAM3X8E|💚good|
Duet Wifi + X5|SAM3X8E|❓unknown|E3D Toolchanger on hand
Duet 2 Maestro|SA…
-
@adrianholovaty raised the issue at the Anaheim CG meeting Jan. 26, 2018, that it would be nice to leverage GMNX's musical time synchronization features for audio performances even in the absence of a…
-
Edit by Dandelion Sprout 25th of February 2020: GitHub spectacularly failed to tell me that there was a comment limit of 2,500 comments in issue threads?! So now it seems that discussion has been forc…