-
Is there any way to let the kernel the control the fan using the fan header on the CM4 IO Board? The fan always spins because it's plugged into a power adapter.
-
Currently, users can use a Limelight 3 using the following steps. A build should be generated along with the rest for Limelight.
via @mcm001
steps
1. flash our stock Pi image (NOT limelight)
2.…
-
**### I've use OpenVINO 2022.3 on Raspberry pi ( 64 bit ) + Intel NCS2**
Show error
**pi@raspberrypi:**~/omz_demos_build $ ./aarch64/Release/interactive_face_detection_demo -m ./models/face-detect…
-
I recently tried to enable the overlayfs with raspi-config on my CM4 which has both eMMC and NVMe storage. It works if I have the system booted from eMMC but fails when I boot the system from NVMe.
`…
-
### Describe the bug
Device is Pi 5.
My boot drive (sata SSD, plugged with a sata-usb adapter) fails to boot in Pi-5 when connected to a usb-3 slot. It boots perfectly fine when connected to a u…
ghost updated
10 months ago
-
你好 hzyitc,
非常感谢你关于红米AX3000的贡献， 以及上个月向openwrt官方仓库PR尝试. 让IPQ50xx WIFI6用户看到了曙光和希望。
RAX3000Q/QY 的拆机文章在这里，[拆机](https://www.acwifi.net/18224.html)
打开telnet: ping 测试 输入：$(telnetd&) 开始； 然后输入$(echo${IFS}r…
-
Thought this might be of interest. You can buy it, but it is also OSHW :-)
![Nebra-Compute-Module-4-1_2000x2000](https://user-images.githubusercontent.com/481677/231327672-adffea9f-180a-4dd1-a7e6-0…
-
### Describe the bug
Hello,
There is an issue in Z800AX when installing a newer snapshot other than r26434.
On rebooting the system remains unresponsive and the console error is:
[ 11.452083…
-
The current situation is that uboot cannot find `extlinux.conf`.
I hope uboot can automatically start `extlinux.conf`.
`opensbi` `uboot` use upstream.
# opensbi
```
git clone https://github.com…
-