-
Hi everyone,
I am currently using the **T3-S3 SX1280 (with PA)** development board with the following parameter configuration: **BW=406.25, SyncWord=0x12, SF=12, CR=8**. I modified the RadioLibExam…
-
Has anyone worked with the Firehose 3-channel SDR? It sells for $800, and has an ethernet interface. Much much cheaper than something like a USRP N210. If you've tried it, what did you like or dislike…
-
![2018-08-23 16-36-17](https://user-images.githubusercontent.com/33242231/44516411-9dd64b80-a6f7-11e8-87e8-5f0e1c0c456a.png)
![2018-08-23 16-37-07](https://user-images.githubusercontent.com/33242231/…
-
Hi,
When i try to scan bands 1,3 i get this error :
Starting recv thread
Searching in band n1 - 2126.550000 MHz - 26.428571% (found 0 cells)Overflow
Searching in band n3 - 1865.050000 MHz - 8…
-
check why it sometime fails
> Failed filling SHM with zeros: shm_rx_ant_15_side_0_swing_0
or try another faster way via system call
/dev/null >> shm_file
-
Is the wrapper still called the same way? When I do the following in a console:
import pysdruhd as uhd
usrp = uhd.Usrp(streams={"A:A": {'antenna': 'RX2', 'frequency':100e6, 'gain':60}}, rate=2e6)…
-
### What happened?
When using File Meta Source with Repeat = True, there is a very noticeable lag (ca 500 ms) when the file “rewinds” to the beginning.
This may only happen at high sample rates, …
nuena updated
6 months ago
-
Dear @mrlnc,
My current setup uses USRP B-205 mini connected to a 2.4/5.8 GHz antenna for the RX2 to decode DJI Mavic 2 which uses Ocusync 2.0 protocol. I tried running the code both in indoor and …
-
I am very new in USRP and using this code to decode the EPCs of RFID tags. Currently, I made it workable in USRP N2100 with SBX daughterboard to decode commercial UHF tags. I want to now extract the R…
-
师兄,你们有用usrp做过实现的代码吗?