-
Hi
I want to use a ESP to a W5500 with SPI, but the ESP is also Slave in another SPI on the Board. How can i do this.
The target is, the ESP gets data over SPI from another controller (some STM…
-
The WIZCFG.COM utility was a simplistic, but effective, method of configuring CP/NET on WizNET W5500-based adapters. IFCONFIG is better in that it supports DHCP, however it needs some extensions in or…
-
I am trying to access the HTTPS server through ethernet, to achieve this I have modified the HTTPS (Async Server Example) code to handle an ethernet connection (by adding an ethernet connection code).…
-
does anybody use this combination with success?
I have constant corrupted web pages (some characters are wrong), even with the basic web server example
I do not have this issue with the ethernet2 li…
-
I am running the v1.0.4 firmware.uf2 release with the HTTP_Server example from examples/HTTP/HTTP_Server/HTTP_Server.py
I use a Raspberry Pico connected to one of these small blue w5500 boards (ht…
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
Hi there,
I am facing connection issues with the MQTT broker, while trying to connect using an Ethernet Shield2 (W5500).
I am not sure if the library has full support for the W5500 chip, exact c…
-
Merge support code from https://github.com/arjenhiemstra/SEM-Bootloader.
-
I am using an ESP32-S3 and SX1262.
There is an issue with reliable packets sometimes causing a corrupt heap, it seems to be coming from the "Queue Manager routine":
`V (640368) LoRaMesher: Free he…
-
While using ESP32 with W5500 (ethernet), PubSubClient gets disconnected from MQTT broker from time to time (time periods differs significantly - from few minutes to couple of hours).
Looks like Pu…