-
[src/boards/include/boards/waveshare_rp2040_lcd_1.28.h](https://github.com/raspberrypi/pico-sdk/blob/master/src/boards/include/boards/waveshare_rp2040_lcd_1.28.h) pin assignments are incorrect. correc…
-
### Platform
ESP32
### Assembly
I did the assembly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- …
-
# Description
There is an issue with threading where the web server does not exit and unbind the port fully sometimes before the new web server thread is initialized which results in the server ports…
-
Hi,
I have a ducted heating and want to know is this project could work with this :
- LG UUD3 U30 (Heat Pump outdoor unit)
- LG UM36F N20 (HVAC indoor unit)
- LG PREMTB100 / RS3 (As Master/Sla…
-
Hello
Will you please add support for the RP2040-PiZero?
https://www.waveshare.com/wiki/RP2040-PiZero
Thanks
-
I couldn't find any specific information about ESPHome integration for the CST328 touchscreen controller on the [Waveshare ESP32-S3-Touch-LCD-2.8 board](https://www.waveshare.com/esp32-s3-touch-lcd-2.…
-
I am working with a AlphaBot robot, that uses an arduino plus (https://www.waveshare.com/wiki/AlphaBot). The Open Roberta Connector detects the arduino as a BionicFlower and can not be programmed via …
-
Please add in __init__.py support for a crystal oscillator running at 12Mhz.
I would like to use on a [WaveShare RP2040-PiZero](https://circuitpython.org/board/waveshare_rp2040_pizero/) with a [Wa…
srolf updated
3 months ago
-
After creating this issue
https://github.com/PaulSchulz/esphome-lora-sx126x/issues/1
I build new hardware with ESP32 and SX1262(Waveshare) module, but it is not working
Previously I am using th…
-
I have only just signed up to Github so am unfamiliar with their protocols, but...
I noted this project today and I see some admirable work developing this clock. I have been also working on an NTP b…