-
I have not idea what i am doing wrong.
the program does not get over the Ping.ping ("Host") or Ping.ping (ip_adress), it just stops.
the sketch is rather simple....
```
bool pingServer(con…
-
After flashing with:
> esptool.py --port /dev/ttyUSB0 --baud 1000000 write_flash --flash_size=4MB --flash_mode dio 0 --verify
```
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type...…
-
### The problem
Following the example within the ESPHome.io page `https://next.esphome.io/components/display/waveshare_epaper.html`
I've paired up a Waveshare ePaper 2.92 board version 2.1 to a Wemo…
-
I actually have been successful in doing the android arduino serial communication. Now, I want to shift my arduino circuit to Wemos D1 & R2 mini. Because of that reason, I want Android arduino serial …
-
I'm trying to use TomThumb with my little project. I use a wemos d1 mini pro (ESP8266) and the wemos OLED shield (64*48 SSD1306). Here is my project -> [my project](https://github.com/inrepublica/Wemo…
-
Hello friend, i try the basic code with my wemos d1 mini n transistor BC547 but did't work
This is the result
![IMG-20240930-WA0070.jpg](https://github.com/user-attachments/assets/7904dbf3-d3fb-4983-b…
-
Hi,
I figure that there is different behavior depending the ESP32 board used :
- I have tested on "wemos D1 mini 32" : I have very bad sound with internal DAC (bad power supply stage on this boa…
-
Pls support this module WeMos D1 mini I2C Dual Motor Driver Shield Driver Module TB6612FNG
https://wiki.wemos.cc/products:d1_mini_shields:motor_shield
https://github.com/wemos/WEMOS_Motor_Shield_A…
-
Hi there! I'm running the example on a Wemos D1 mini clone board. It compiles, uploads and runs ok. But when I try to access the "Setup Clock" button, it throws an exception and resets the Wemos. The …
-
I watched a video and looked at the guide here and over and over for how to install the software to the arduino and am getting an error with this
Arduino: 1.8.19 (Windows 10), Board: "LOLIN(WEMOS) …