-
### Port, board and/or hardware
Waveshare ESP32-S3-ZERO
### MicroPython version
MicroPython v1.24.0 on 2024-10-25; Generic ESP32S3 module with ESP32S3
### Reproduction
Here is the code I use to t…
-
I would like to have the option to disable AP on the WiCan
The way my other smart devices work is I can disable AP, but if the device can't connect to my home WiFi AP is re enabled temporarily to ena…
-
Hello
I am modifying your code to make your own version of esp-raido.
I would like to publish the code on my german website.
I also give a link and a reference to your code.
It's OK?
I have fou…
-
When any power outage occurs and device can't connect to current WiFi network
(after three attempts) it falls back to GifTV AP Mode that anyone can connect to
(Open WiFi, no password protected).
…
-
after flashing AP doesn't create. what do i do?
-
### Device
T1 EU 2 gang
### Version
not sure
### Question
Hello,
I am trying to get the device working again, after having lost connection to it. I am uncertain about the firmware version instal…
-
## Steps to reproduce:
- In the host Pico-W load [Pico-W AP example](https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/access_point/picow_access_point.c).
- In the second Pico-W l…
-
Hello, I've just setup the board with ESPHome fw. integrated with HA.
The setup is OK, all fine except that in one phase the reading is negative.
 with 24.1 because of an error:
> ebusd Status: begin failed, error: ESP_ERR_HTTP_CONNECT
After …
-
### The problem
When attempting to update ESP8266 devices, I get the following error in esphome.
`ERROR Error binary size: Error: ESP does not have enough space to store OTA file. Please try flash…