-
I strictly followed the READMEs. However, the waveshare screen did not light up and erorr occured as below:
…
-
when i first pluged in the device the power led (blue) was on and there was 2 other led (red) i belive for gsm and gps
once i uploaded the firmware from github and started working on it using platfo…
-
Ik ondervind regelmatig onderbrekingen in de verbinding met de KITT webpagina waarop ik de data van mijn omgevingsmonitor kan zien.
Het enige dat lijkt te helpen is het resetten van de omgevingsmonit…
-
### Port, board and/or hardware
RPI PICO W
### MicroPython version
MicroPython v1.24.0-preview.224.g6c3dc0c0b on 2024-08-22; Raspberry Pi Pico W with RP2040
### Reproduction
```py
impo…
-
Hello all,
I've been helping users of USB WiFi adapters for some years now and I have noticed that problems are generally first blamed on the driver in use. I get that. However, our USB WiFi adapte…
-
WFX_FIRMWARE_VERSION = FW3.17.0
WFX_LINUX_DRIVER_VERSION = 2.14.1-public
Was doing some testing on various wifi-provisioning to various APs.
We are enabling a WFX AP on wlan1, then setting w…
-
I'm maintaining a hardware project (https://www.bsb-lan.de) where probably half of the installations run on an Olimex (either EVB or POE). About a dozen users using the Olimex ESP32-POE have now repor…
-
### Basic Infos
#### Hardware
WiFimanager Branch/Release: Master
Esp8266/Esp32:
Hardware: ESP32-s3
Core Version: 3.0.0, staging
### Description
When running WM as an ESP-I…
-
@bastibl Hello, I'm using your example code "wifi_tx.grc" and "wifi_rx.grc", and have modified them into the following 2 images:
- This is the TX flow graph:
Says
tx_pin: GPIO4
rx_pin: GPIO14
So I edited the code to like this but cant seem …