-
```
Sipdroid is configured for gizmo. It appears that on unsecure wifi networks
it registers OK but on networks with security enabled (WPA2) the client fails
to register with a timeout error.
What …
-
```
Sipdroid is configured for gizmo. It appears that on unsecure wifi networks
it registers OK but on networks with security enabled (WPA2) the client fails
to register with a timeout error.
What …
-
```
Sipdroid is configured for gizmo. It appears that on unsecure wifi networks
it registers OK but on networks with security enabled (WPA2) the client fails
to register with a timeout error.
What …
-
```
Sipdroid is configured for gizmo. It appears that on unsecure wifi networks
it registers OK but on networks with security enabled (WPA2) the client fails
to register with a timeout error.
What …
-
Looking on the "Client devices" tab, information on the WIFI connection of each device is displayed, example:
![zabbix2](https://github.com/patricegautier/unifiZabbix/assets/10811598/efdf21f8-56e9-…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
The esp32 setup connects to the internet without setting a static ip.
But as soon as I set it, connection to the internet stops. It is connected to my router, yes I can access my router gateway. LAN …
-
**Describe the bug**
Router rebooted today. Miners lost connection but seem to have all (5 of them) connected back to wifi after it came back online. However, all 5 did not start mining.
I can …
-
Unable to connect to a WiFi network with a name (SSID) that contains a space (e.g. "My wifi").
This happens on an Arduino Uno R4 WiFi board. The WiFi firmware is updated to the current latest (0.3.…
adgbu updated
6 months ago
-
Hi,
I am new to using Zephyr and Wi-Fi and am currently attempting to implement this code on the nRF7002 DK. I have run into an error that I cannot seem to resolve on my own. I would appreciate any…