-
**The problem/use-case that the feature addresses**
Sometimes I would like to see which slot a key should belong to without actually adding it. So I think such a feature would be helpful.
I am s…
-
After update [TYZS13] (see log) I couldn't communicate with the adapter in Zigbee...
Elelabs_EzspFwUtility.py flash -f efr32mg13p-v8-6910-57600.gbl -p COM13
Elelabs_EzspFwUtility: Generic Zigbee…
-
Most of it, with the exception of the XMODEM state machine which remains largely undocumented, are fairly trivial wrappers around the WonderSwan UART.
- https://github.com/asiekierka/AthenaOS/commi…
-
After flashing it in the boot attempt appears the network initialization and then an error that does not start the system.
I flashed it again passing the image through xmodem (with dd after), also …
-
Hello,
I try to update firmware of my Elelabs adapter.
I get this stack :
```cmd
root@jeedup:/opt/elelabs/elelabs-zigbee-ezsp-utility# python3 Elelabs_EzspFwUtility.py flash -f firmware/efr32mg1…
-
BLE Name: DSJM
Service UUID: 0000fe00-0000-1000-8000-00805f9b34fb
Tx Characteristic UUID: 0000fe01-0000-1000-8000-00805f9b34fb
Rx Characteristic UUID: 0000fe02-0000-1000-8000-00805f9b34fb
Initia…
-
```
drasko@Lenin:~/rtl8710/RTL00MP3$ make
make[1]: Entering directory '/home/drasko/rtl8710/RTL00MP3'
===========================================================
Compile (build)
=================…
-
Hey @jmbaur ! Frist, amazing work here and this project is inspiring in a lot of regards (linuxboot/heads maintainer here)
I did not have enough nix knowledge before to be able to test this project…
-
A Calendar without the size overload from java.util.Calendar could be useful to work with time series from sensors. I did one similar to DateManagement, i.e. using only a long integer and an (static) …
-
Would probably be a good idea to focus on the dfu loading rather than the old serial bootloader. Most people will be getting their boards from crowdsupply which comes preloaded...