-
This is for tracking the eventual improvement/cleanup of the Aqara (H1) switch quirks:
1. ✅ ~~https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/xiaomi/aqara/opple_switch.py is missing…
-
### The problem
```
Logger: homeassistant.core
Source: core.py:508
First occurred: 03:13:35 (1 occurrences)
Last logged: 03:13:35
Something is blocking Home Assistant from wrapping up the st…
3jam3 updated
2 months ago
-
### Problem description
Hello, I get this garage door opener from Aliexpress and once connected to ZHA, is does not show the proper command / informations.
### Solution description
As a doo…
-
### The problem
I've never reported an issue on Github like this before, but I am fighting getting a Sonoff Zigbee Dongle P setup. Zigbee2Mqtt is failing. MQTT wont install anymore. ZHA wont find the…
-
### The problem
Since FW 1.1.4 and above many attributes of Sonoff TRVZB are available, but throught ZHA only a few are exposed.
list of attributes available:
https://www.zigbee2mqtt.io/devices…
-
**System is:**
Intel-NUC / Home Assistant OS / HassOS 4.10 / Home Assistant (0.112.2)
Conbee II firmware: deCONZ_ConBeeII_0x26580700.bin.GCF (but this problem was present also with deCONZ_ConBeeII_0…
-
### Problem description
Similar device aded to solve the following issue #3124
My device is detected as TS0601 _TZE200_7ytb3h8u
Bought here: https://fr.aliexpress.com/item/1005006548852233.h…
-
Hi,
First of all thank you very much for your repository !
I compared the configuration parameters between [Itead](https://github.com/itead/Sonoff_Zigbee_Dongle_Firmware/tree/master/Dongle-E/NCP…
-
Hello,
I am experiencing difficulties when using OTA (Over-The-Air) to flash the firmware on LYWSD03MMC.
For beginning, i flashed the device with devbis/z03mmc but sensor crash and don't show tr…
-
### The problem
There seems to be duplicate devices registered in the "Default Lightlink Group" (what that is, I am unsure of) in ZHA.
![image](https://github.com/home-assistant/core/assets/777309…