-
### The problem
I have an RM4Pro. Trying to learn 315Mhz rf code.
It seem's that it not works from scripts and from developer/services
Logger: homeassistant.components.broadlink.remote
Source: c…
-
### Discussed in https://github.com/arendst/Tasmota/discussions/14210
Originally posted by **Saur0o0n** December 29, 2021
I need 315Mhz bridge - and this one is one of few available. It's sold…
-
Hello,
I think you are using a DSLogic with DSView to analyse the signal.
I did the same but I just want to know how you decode the signal and display hexa value ?
Your code is working with my mode…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Hass.io
**ESP (ESP32/ESP8266, Board/Sonoff):**
Attempted with D1 Mini and NodeMCU board.
**ESPHome version (latest pro…
-
The problem is when you connect the two receivers(315MHz and 433MHz). In consequence of using a variable of type static, it overwrites data in a single memory controller.
-
I wired the CC1101 module to an Uno with the same diagram as the Nano pinout and uploaded the RC-Switch cc1101 example "SendDemo_cc1101". The only modifications I made to the example were changing the…
-
First, there's a typo in the method name `setFreqeuncy`, it should be named `setFrequency`.
Then, I have no idea how to use that. What's the `FRF` parameter? Is it the actual tx/rx frequency in MHz…
-
When i try to scan 315 MHz remote, i'm getting timeout - never got to phase 2.
The remote button can be added using Broadlink original app - the app asks for frequency, i add 315 manually, and the co…
iznaf updated
3 years ago
-
As part of my device build out ( esp32 with cc1101 ) want to build a single device with the following capabilities
1 - Ability to transmit either Pilight or RFGateway protocols, on any supported CC…
-
- [x] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Sonoff-Tasmota/blob/deve…