-
### Description of the bug
prusa-slicer --help-fff does nothing even though the wiki reports it as the correct way to ask for help
prusa-slicer --help does nothing
prusa-slicer with any bad paramet…
-
per mailing list 4/24/13
export directly to stl from nef polyhedron w/o manifold check
throw warning if object is not manifold, offer option to export anyway
(note to the user they may need to repa…
-
I’m afraid that I have the recurring problem of not being able to hide the model by clicking the eye in the hierarchy. It happened yesterday with one specimen and now it is happening with multiples. I…
-
### Version
2.3.1
### Operating system type + version
Manjaro Linux
Custom build with
```
cmake -B build -S PrusaSlicer-version_2.3.1 \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_…
-
I have been struggling with consistent layer shifts (not always at the same layer) printing thorugh Octoprint on my Prusa MK3S. Layer shifts are on the order of 0.2 to 0.5mm can would typically happe…
-
I'm eager to try out new stuff in 4.13 - meanwhile SlicerJupyter has become indispensable. Hope you get a chance to look into the compilation issues on Linux I suspect are at fault because the extensi…
-
It is expected that due to VTK and other library updates, extensions may need to be updated, too. This ticket tracks these necessary updates.
Extensions that were considered to be fixed: https://do…
-
I get still ticking sound after a couple of seconds and the printer stops.
Printer: Anycubic Mega S
FW: v1.4.3
Can this issue confirmed by others?
-
We started a discussion in the issue `https://github.com/Slicer/Slicer-i18n/issues/1`, but moving the content here, because that repository will be removed.
-----
[comradekingu](https://github.com…
-
How to get access to the `{{cookiecutter.github_organization}}/{{cookiecutter.github_project}}` repository in order to build the SlicerCustomApplication.
Tying the command
```
git clone https:…