-
Running the latest RPC Go version 2.34.1 on an AMT 11.8 system fails and gives garbled output.
Tested on a couple of 11.8 systems and both have same error. I ran the same "amtinfo" command on an ol…
-
**Describe the bug**
After upgrading from 1.1.20 to 1.1.24 my AMT agents are no longer showing as connected (online) on the "My Devices" page. This is while the agents are powered down into one of so…
-
**Describe your issue**
I encounter an error on my MeshCentral server (which also crashes the service) every time my Intel AMT device attempts to contact the remote activation service. In the `mesher…
-
Hi.
I'm probably misunderstanding something, but MeshCommander has a required password policy to connect to a computer (min 8 chars, upper and lowercase and a special character.)
While I applaud…
-
**Add the ability for transfers to send to an address that are locked until x block height*
This is a consensus change that will need to be approved amongst all indexers. This will require a locked…
-
It is a bit hard to rely on this crate (and by extension the noise crate) in cross-platform libraries, because while scalar fallbacks exist, it still tries to compile the simd implementations for non-…
-
Hi,
you specify in the Readmy (https://github.com/Ylianst/MeshCommander#firmware-installation) that it should be possible to install Meshcommander as App directly to the Intel AMT Flash. Sadly the …
-
{
"p": "GRC20",
"op": "mint",
"tick": "GitHub",
"amt": "2000"
}
-
![image](https://github.com/user-attachments/assets/dae6ef6e-c2fb-4a41-adf7-874afe940815)
![image](https://github.com/user-attachments/assets/0e1cc922-1f9d-4d32-88ff-0268ab83ff9d)
CREATE TABLE…
-
**Describe the bug** 🪲
When in Client Control mode and if User Consent is not established, Bootoptions API returns status 200 and results in unexpected behavior. Expected Bootoptions API to fail w…