-
Hi
Is it true that you made the Trigorilla Pro Boards for Anycubic? Are they identical to the Chitu boards (except the board layout)? Do you have plans to release firmware sourcecode in the future …
-
General Question is: do we need a Kobra ACE pro FW - Update too? Or does the "DuckPro-Kobra3"-update-package contains also a FW-Update for it ?
-
After the last Update i have Micro Stops (Stuttering) please look the picture. I have a Anycubic Vyper and before the Prints are aussome.
 call…
-
When I perform a UV test on 4.2.17 my Photon is fine. However, if I then update the firmware to 4.2.18/9 (Anycubic or Epax) the LCD begins to flicker whenever the UV test is performed. I have swapped …
-
On my Anycubic Photon, when i try to "print" the PHCNET_UI_2_8_190513.bin, and PHCNET_UI_2_8_190513.logo files , the printer show the error "File Format Error". I dont have idea, what is the mistake?…
-
Thanks for this firmware. In my first attempt, it fail, I had to do the emergency recovery, but I got it working.
In the first point of the readme is this:
"Features (Simple)
Web interface (Mai…
-
Hi,
I use an Anycubic i3 Mega with stock drivers, but I upgraded my extruder, which requires reversed direction.
Could you provide a hex file for this scenario? Thanks a lot
Stefan