-
PIO Core Call Error: "The current working directory /Users/adeahmed/Documents/PlatformIO/Projects/Raspberry Pico W will be used for the project.\n\nThe next files/directories have been created in /Us…
-
How to debug an Arduino program with the Segger J-Link?
- Core: Arduino Mbed OS RP2040 Boards
- Board: Pico RP2040 board
- Option: `-g3 -ggdb`
- Programmer: Segger J-Link
The mbed RTOS plug-…
-
I tried to run the sample code on an RPi Pico, but I always got a 0 as output (Arduino IDE 2.0.3).
The problem is the memcpy function for shifting the arrays with overlapping memory. I changed it to …
-
Hello, guys
I use latest Stm32duino and my chip is STM32F103ZET6
I tried to use the 128X64 OLED by using U8g2Lib's software I2C , but it doesn't work.
However, I used the same code on Arduino UNO,a…
-
Hello!
I purchased an evil crow rf v2 on aliexpress after arriving I tried to flash it with firmware but error appeared. In arduino ide error:
```
Sketch uses 940046 bytes (71%) of program storage…
-
This is my test code for multicore, with PIO arduino framework:
```
#include "Arduino.h"
#include "pico/multicore.h"
void setup() {
multicore_reset_core1();
multicore_launch_core1(core1_en…
-
On reaching step 6 of Chapter 4 of the getting started guide ("Click Create to create the project."), I get two error boxes:
1: Failed to find python3 executable
2: Generating project based on t…
-
I have a program using LittleFS that works OK when not using PSRAM, but hangs when using PSRAM.
Here's a minimal demonstration:
````text
#include
uint32_t Workspace[10000] PSRAM;
const int l…
-
System: Custom rp2040 board with ST7789V display, TFT_eSPI library (PIO SPI) and arduino-pico core.
With pngDEC 1.0.0 and 1.0.1 everything works nicely. When using pngDEC 1.0.2 system sometimes jam…
-
Hello,
I am successfully using this firmware with [LR1302 from Elecrow](https://www.elecrow.com/lr1302-lorawan-gateway-module-spi-eu868-sx1302-long-range-gateway-module-support-8-channels.html) and…