-
Hello,
When performing a normal checkout of CW from git the default branch that is checked out is the develop branch. I would like to know if this is intentional.
Secondly following the git inst…
-
I'm trying to use interrupts on atmega8515
i'm trying to decode a quadrature decoder using two input pins with interrupts.
The funcion"decodeEndoder()" works on attiny85.
It is the correct way to…
-
I need to create a custom bootloader for mega1284P with 14.746MHz , baudrate=57600
and LED on port C7.
I am using the C:\arduino183\hardware\MightyCore\avr\bootloaders\optiboot.old database.
chan…
-
make atmega128
avr-gcc (GCC) 4.9.2
Copyright (C) 2014 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILI…
-
Hello,
I've found your great repo for using Arduino with Internal Oscillators due to power saving needs,
However, the code I have needs more than 1Mhz of the clock and could use less than 8Mhz of …
-
just updated but had to `brew switch avr-gcc 6.3.0` to have my code compile again.
```
Compiling C: main.c
avr-gcc -c -mmcu=atmega8515 -I. -gdwarf-2 -Os -funsigned-char -funsigned-bitfields -fpa…
-
Now that Arduino 1.6.3 is working, we should start supporting SAM and non-avr boards.
sudar updated
6 years ago
-
Hi!
I'm struggling to find any information on how to write and upload code to a generic AVR, such as the ATmega32, without depending on the Arduino framework.
Does there exist/is it possible to cr…
-
Hi there,
I'm trying to flash an empty sketch to my brand new ATtiny48-PU (have 10pcs of them), and after successfully compiling I got this error message:
```
Sketch uses 334 bytes (8%) of prog…
-
I chose the title 8051core as a working title, because the ATmega8515 and ATmega162 is pin compatible with the old 8051's. I don't feel like merging this into MightyCore, since these chips don't got t…