-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
```
What steps will reproduce the problem?
1. Unpack\install arduino-1.0.1-windows.zip
2. copy Timer1 library to \arduino-1.0.1\libraries
3. Start Arduino IDE, load ISRBlink example sketch and verify…
-
According to PonyProg [website](http://www.lancos.com/prog.html) USB support have been on the TODO list for quite a while now. Issue #3 mentioned that it was the was first priority after porting it to…
-
Hello.
First thanks for the effort.
The company that I work for is initiating a project that heavily depends on simulating boards , and Arduino is in our list. as in this project https://github.co…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
```
For a variety of ATtiny chips (x4, x5, x61 and ATmega161), the respective avr
iot define files define BIN to 7 for Bipolar Input Mode in ADCSRB.
The core Print.h defines BIN to be 2.
This leads…
-
It would be good to use some recent development practices in Optiboot:-)
Automatic tests should make maintaining of this project much easier.
What can be done:
1. Check if everything compile (don…