-
mac addres chenged after last ota and to C8478C000000
somthing is wrong with thet and cant change mac addres
-
I'm trying to build the http server (myHTTP2022-2010) project using the N SDK. I'm using VS 2019.
When I open the solution there are several files that are reported as missing.
![solution](https:/…
-
**Describe the bug**
Hi, I uploaded the open beken firmware on a Aubee power metering plug. All is good, and Home Assistant sees the integration correctly via MQTT:
However, when I add the "…
-
What do we NEED?
we currently have MQTT commands, specifically
`cmnd//CMND` : where CMND is case insensitive.
`cmnd//POWER`
accepts 0-100 for setting channel 0
`cmnd//POWERn`
accepts 0-100 …
-
Hello
BK
I have managed to flash a power strip with BK7231 successfully .
I noticed though that upon selecting the btn_tgl_all on first press sends MQTT values on each switch/relay as 0 on second …
-
I cant compile because CFG_GetDeviceName
D:\git\bk7231\openbk7231n-master\platforms\bk7231n\bk7231n_os/beken378/func/lwip_intf/lwip-2.0.2/port/ethernetif.c:140: undefined reference to `CFG_GetDeviceN…
-
Your initiative with this project is simply amazing.
I'm not so experienced in it, so I wonder if the same approach used by tuya-convert could also be used to flash libretuya-based firmwares.
-
I have curtains motor switch with wr3e and trying to flash it.
When I pull tx2 pin on ground when starting, I see diode on the board doesn't light. I think I switch chip to download board. But I can'…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Hardware converted a Qualitel RGB LED bulb that uses the SM2135 LED driver IC, with a ESP-12F and latest Tasmota…
-
Would it be possible to create a profile for the Aubess 20A plug?
Attached is the original firmware and the paired firmware ssid = hotspot, pass = abcdabcd
Pictures of the device:
![IMG_9183](https…