-
Hi,
I"m trying to get a JLINK programmer running with the ox64.
First issue I see is - the JTAG pins on the ox64 are also the same pins used for UART0 and UART1.
Is there a way to remap the J…
-
This is a repost of https://community.platformio.org/t/bl808-risc-v-support/30892.
There are new RISC-V boards popping out almost daily with great price/performance ratio, e.g. Sipeed M1s Dock [M1…
-
Hi,
My device only seems to work in cloud mode. When my Internet is connected, ewe app and homeassistant works well. But if I disconnect the Internet. All devices will become unavailable. But when …
-
Hello again guys, I am trying to run a bl616 as a usb hid keyboard, I noticed the example from the cherryusb repo, I imported the c-file in my project and looks like it compiled , the problem i see is…
-
I have tried a couple of example programs based on netif now, specifically the `lwip_tcp` and `lwip_udp` examples.
When updating `IP_ADDR0` - `IP_ADDR3` the new address gets ignored, and the old ad…
-
Why is the xram located at the start of the ocram instead of using the dedicated xram
From the included linker scripts:
```
xram_memory (!rx) : ORIGIN = 0x22020000, LENGTH = 16K
```
…
-
### What happened?
This unbranded Zigbee Smart Outlet is listed as ? for Power when it is a plug-in device:
 example, it seems like the pins init function, [`board_iso11898_gpio_init()`](https://github.com/bouffalolab/bl_mcu_sdk/blob/c75ba0cf8403802a30912e89d2105969b4b73913/e…
-
Doesn't the livpka.a blob contradict your claim that this is completely open source?