-
@mbway Important note: We have come to a point where the rendering results are very good, the rest are just **tiny** issues! But nonetheless I will break this tiny issues into separated issues, becaus…
-
[test.zip](https://github.com/mozman/ezdxf/files/6236421/test.zip)
![test](https://user-images.githubusercontent.com/5702248/113141705-9dfa3880-925c-11eb-8d60-25742fe57fc4.png)
```python
fig …
-
The magenta text frames are calculated by ezdxf with matplotlib support.
Arial Regular BricsCAD vs cad_viewer.py - this is very good:
![image](https://user-images.githubusercontent.com/4230966/106…
-
The text border calculation works well, but there is an issue with the text height for ALIGNED single line text, rendering by cad_viewer.py:
![image](https://user-images.githubusercontent.com/42309…
-
DXF file can be opened by cad2007 or above, but not by cad2007
If using cad2007 to open DXF, an error will be reported:Error 50 in graph header, line 960.
Invalid or incomplete DXF input - drawing…
-
Rotating an Arc(0, 360) about any angle creates an Arc(x, x), start angle == end_angle which is interpreted as no Arc.
Is defining start angle == end angle as full circle a not good idea:
![imag…
-
This is a hatch which is crashing ezdxf. As you can see from the code, there are `edge path: associative hatch not supported` messages so the hatch is missing parts, but it still triggers the crash an…
mbway updated
3 years ago
-
Hello.
I can read/write dxf files containing text, which have fonts (styles) specified, using eg [this](https://github.com/mozman/ezdxf/issues/243#issuecomment-713598895).
However, Ive tried sev…
-
The DOSLibLoader shown in the help could be improved by adding a check of the underlying CAD application and adjusting the arx to load to suit. The following example allows it to work for BricsCAD & A…
-
I realised there was a mistake with the condition test for AutoCAD. I had wrongly changed the check to ```(= prog "acadv")``` for AutoCAD this should be ```(= prog "acad")```. Revised version below.
…