-
Hi,
Did anybody try to connect the CJMCU-8128 with a wemos d1 mini pro?
I've uploaded the code from this project to the device and that sort of works but in the serial monitor I get some stange …
-
Hello, thanks for this amazing job.
I would like to ask you a question about configuration.
I would like to configure the sensor to:
- send data every 10 mins (I want to limit the bluetooth chip us…
-
Is it planned to get support or is there a workaround already for MAX44009 / GY-49 ambient light sensor ? It's an I2C module pretty efficient for light sensing.
Basic description of it here: https://…
-
Hi, firstly thanks for developing this.
I'm obviously using this for the first time, and are attempting to test I2C communications.
It seems that the device is detected, but I am unable to confi…
-
My CCS811 from CJMCU does not works after flashing completed.
Before flashing it was working good. After i flashed it, It does not works with the library.
Its says I2c Error every time, i have …
-
Hi Maarten how are you man ?
I just successful flashed my CJMCU-811 using an WEMOS D1
Thank you so much man
-
Hello Marteen , pleased to contact you.
We've been fighing for weeks to get an accurate temp/humity/CO2/TVOC measurements from a CJMCU-8118, using ESP-IDF.
Best results have been 2ºC over , and …
-
Merry Christmas!
I just got a new chinese PCB called the CJMCU-32 12 that has the ESP module, AtMega and sdcard slot all in one pcb. I tried flashing it with your old version using a tutorial linke…
-
### PROBLEM DESCRIPTION
i tested two sensors
first bme280. temp 22
then CJMCU-8128, SI7921 TEMP=25.4 and BMP280=24.9
the sensor is on 3v on the Wemos d1.
### REQUESTED INFORMATION
_Mak…
-
I have some of these Purple Pill boards lying around:
https://stm32-base.org/boards/STM32F103C8T6-Purple-Pill.html
My Idea was to use them for your project, as they are small and have a proto area w…