-
@coreycothrum I'm using a compulab board with an imx8mp part. They have a mender configuration that uses `mender-partuuid`. Integrating your layer I see
```
ERROR: mender-luks does not currently sup…
-
I have a raspberry pi camera plugged into the ucm board via the narrow arducam adapter cable. Not sure which way supposed to be plugged in but I have it facing down. When I use `ucm-imx8m-plus_mipi-cs…
-
I know normally mender would be doing updates. But, if I want to reflash with a new image and have flashed before, holding down the button on the UCM board and trying to boot off the SD card doesn't w…
-
### System
AMD64 (Compulab FitPC4 computer)
* package: airspy-1.0.10_1
### Expected behavior
Should work with Airspy SDR
### Actual behavior
Segmentation fault
### Steps to reproduce the b…
-
I'm trying to bitbake fsl-image-qt5-validation-imx image from Warrior repo with MACHINE ??= 'cl-som-imx6' amd DISTRO ?= 'fsl-imx-x11' and it failed with the following message:
```sh
ERROR: wpa-s…
-
**Version Used**:
2.6.0. Doesn't matter
**Steps to Reproduce**:
I've seen random roslyn crashes / compilation errors with mono ever since switching to it for building the BCL (on arm/arm64 l…
-
Hello,
We are using iot-gate-imx8 as internet gateway. As per our usage, it seems cellular modem connection is lot more stable when using wvdial/pppd in comparison to ModemManager/NetworkManager. …
-
I am sorry if it's a wrong platform to ask this question. I am trying to build kernel drivers for my project and facing this error ERROR: modpost: "__sync_val_compare_and_swap_4" [ ] Undefined!
…
-
@vraevsky apparently due to changes in https://github.com/compulab-yokneam/meta-compulab-bsp the build doesn't work anymore:
`export MACHINE=iot-gate-imx8`
`source compulab-setup-env build`
```…
-
Not able to get base image for CompuLab iot-gate-imx8 platform during local balena push. So far I have tried iot-gate-imx8-node:latest , iot-gate-imx8-node:14.18 and iot-gate-imx8-debian-node:14.18 wi…