-
**Describe the bug:**
J-Link debugger failed to clear breakpoint: Target busy.
**To Reproduce:**
* Start debug session
* Set a breakpoint
* Clear the breakpoint
* Debug Console shows: Fai…
-
### OpenOCD version
Open On-Chip Debugger v0.12.0-esp32-20240318 (2024-03-18-18:26)
### Operating System
Windows 11
### Using an IDE ?
Arduino 2.3.2
### OpenOCD command line
...local\\Arduino15…
-
OS: ubuntu24.04
Zig: 0.14.0-dev.1304+7d54c62c8
branch: main
I also try to build on ubuntu18.04(at company), it got same error.
compile command: zig build -Dtarget=arm-linux-gnueabihf
build…
-
There exists a standard debug header that is:
- physically smaller
- industry standard (no more eBay pinout mysteries and fake programmers)
- keyed (impossible to plug in backwards)
Here's the d…
-
**Describe the bug**
Following the upgrade of Cortex from v1.17.1 to v1.18.0, the Store Gateway Pods are frequently encountering OOMKills. These events appear random, occurring approximately every 5 …
-
Hello. I'm looking for someone who can help me to add support for the Nations N32G455 (https://www.nationstech.com/en/pklmcus/). I was able to program flash memory
using (https://github.com/stlink-o…
-
ST has recently launched a series of low cost ULP MCUs - [STM32U0](https://www.st.com/en/microcontrollers-microprocessors/stm32u0-series.html). They've also released Nucleo boards for one of the more …
-
I would like to understand why the core_cm23.h and core_cm33.h CMSIS5 header files do not described the registers of the two following blocks:
* FPB
* Debug Identification Block
We have some DWT …
-
Dear All,
Please find issue report I'm experiencing with coretx-debug v1.12.1 using it with
VSCode v1.88.1 under Ubuntu LTS v22.04 with NUCLEO-WL55JCx board
when trying to run \sample\basic\blink…
-
Many people like vscode, many dont. I personally would like an option to include some vscode setup like in the container base, mainly for the debugging options.
Setup debugging is hard and we should…