-
Seems an issue when entering in `lowPowerHandler` mode issue
https://github.com/HelTecAutomation/CubeCell-Arduino/issues/230
Seems comming from millis() after lowPowerHandler entered. In my case…
-
Is it possible to communicate a ES32-91520D with a SX1276 (SPI interface with Arduino)?
Do we know the LoRa settings in the ES32-91520D?
-
Board: CubeCell HTCC-AB02S GPS
Example: LoRaWan_OnBoardGPS_Air530
After running for a few minutes in the open field, the code gets stuck in the GPS segment
-
The cubecell has gps and the t-beam too. They can act as a tracker.
-
Hi,
I am new to the LoRa/ microcontroller business and try to make 2 raspberry pico to communicate via LoRa or FSK. Therfore i bought a Waveshare SX1262 Shield (https://www.waveshare.com/pico-lora-…
-
Hi,
quite often (~75% of the time), i get a -2 return code when initialising my CubeCell V2. I have enabled the debug and verbose outputs and this is the results in one case where the module errors…
-
**Describe the bug**
I am unable to make my cubecell go in a proper low power sleep with RadioLib. Here is a minimal working example using the default radio driver from the CubeCell-Arduino core that…
-
Since you have released the V2 version of the Cubecell AB01 it is safe to build the V2 with the current AB01 board available on Platformio? If not what are the differences?
-
HX711_ADC::conversion24bit() is declared as void and not returning the value data.
-
I'm unable to compile the factory test for the WSL V3 board. I'm using the "Heltec Wireless Stick Lite" board in Arduino IDE 2.0.3. The factory test uses the following libraries which aren't found:
…