-
We've been putting together an RP2040-based mech keyboard product that uses individual GPIO pins for keys in lieu of row/column scanning. From a "basic hobbyist tinkering" perspective, individual GPIO…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.3.2 on 2022-07-20; Adafruit FunHouse with ESP32S2
Board ID:adafruit_funhouse
```
### Code/REPL
```python
import adafruit_log…
-
Would like to request support for this if possible.
```
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
#
# You will need to configure …
-
**Is your feature request related to a problem? Please describe.**
The Mbi6033 is a 12 channel chip that shows up in some strips driving 4 RGB LEDs.
It is a Two Wire (DotStar) with a unique reset …
-
### CircuitPython version
```python
Adafruit CircuitPython 8.2.0-75-gc75640eb0-dirty on 2023-08-15; Adafruit Metro ESP32S3 with ESP32S3 (built from main with SD_CS pin added)
Adafruit CircuitPy…
-
- Arduino board: **ItsyBitsy M4 Express**
- Arduino IDE version (found in Arduino -> About Arduino menu): **2.0.4**
- List the steps to reproduce the problem below (if possible attach a sketch…
-
There's a mistake in the `Neopixels / Dotstars` section where colorwheel is stated to return a tuple, but in reality it returns a `0xRRGGBB` int. That text is also mirrored in the learn guide.
> Th…
-
- Arduino board: **Gemma M0**
- Arduino IDE version (found in Arduino -> About Arduino menu): **N/A**
- List the steps to reproduce the problem below (if possible attach a sketch or
copy the sk…
-
- Arduino board: Adafruit Trinket 5V
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.19
- List the steps to reproduce the problem below (if possible attach a sketch or
1…
-
This was intentionally left out of #47 just to keep that PR as simple as possible, since it was a major conversion. With that PR now in place, can look at adding the ability to pass in a non-default S…