-
I'm using an Enttec DMX USB Pro, with firmware version 2.4 together with Ola. It can send DMX data, but RDM doesn't work.
When starting Ola, I see and initial unmute being sent, and also the device…
-
Hi,
I have this system installed on my RPi4B:
```
Linux rpi 6.1.0-rpi4-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.54-1+rpt2 (2023-10-05) aarch64 GNU/Linux
```
I need to control LED light connected with …
Oldes updated
12 months ago
-
Hi,
I'm running ola 0.10.9 on a raspberry pi and I have a Eurolite DMX512-Pro connected via USB.
I deactivated all plugins except dummy, Artnet and ftdidmx
From the logs (attached) I thinkt that t…
-
### Summary of Problem
(Please answer all 3)
- What are you trying to do?
I want to open a serial connection from within a WorkerThread.
- What happens?
I get this Error:
FATAL ERROR…
-
In my application I need to handle DMX input using sources that may send less than 512 channels. The issue is that I don't know how many channels are sent, a user can connect any source, so I need to …
-
**NOTE:** IF YOU DO NOT ATTACH YOUR LOG FILES, THEN THERE IS A HIGHER PROBABILITY THE ISSUE WON'T BE RESOLVED. (Steps at end)
# Please answer the following:
**FPP Version and Hardware**:
Example…
-
### Discussed in https://github.com/someweisguy/esp_dmx/discussions/81
Originally posted by **fedechi** July 21, 2023
Hi Mitch,
first of all thanks for your work!
I'm trying, in very optimis…
-
Hello. I have some DMX lights that are controllable via an [ENTECC ODE Mk2](https://support.enttec.com/support/solutions/articles/101000438016-ode-mk2-70405-70406-) controller which supports either Ar…
-
Hello!
I am looking for a way to use a DMX as an input to home assistant, so that I can use the physical sliders on my DMX board to control the lights in my home! I wasn't sure if this projects sup…
-
I may just be extremely stupid, but I can't seem to get it working with maizedmx. I set the com port to the arduino uno and enabled serial, but nothing. On QLC it's not detected and I can't figure out…