-
I have gnuradio 3.10.1.1-2. make results in errors:
```
[ 46%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/rtl_tcp/rtl_tcp_source_c.cc.o
[ 48%] Building CXX object lib/CMakeFiles/gnur…
-
### Discussed in https://github.com/luigifcruz/pisdr-image/discussions/42
Originally posted by **luigifcruz** December 8, 2020
## 👋 Welcome!
We’re using Discussions as a place to connect w…
-
## Issue Description ##
Trying to get any output from Ettus X410. Running uhd_usrp_probe returns error message. device is found using uhd_find_devices
I am able to login to stm32 microco…
-
GNU Radio has its own bundle system, Python Build Overlay Managed Bundle System: https://github.com/gnuradio/pybombs - should try it out and investigate how it compares versus these Homebrew formulae.…
-
Getting source from GIT repo swradio don't compile on Ubuntu 20.04 - 64 bit with this error:
/usr/lib/qt5/bin/moc -DGITHASH=\"9b775f9\" -DHAVE_SDRPLAY -DHAVE_RTLSDR -DHAVE_AM_DECODER -DHAVE_SSB_DEC…
-
I am investigating L2C using gnss-sdr v.0.17 (binary distribution from Debian/sid), processing IQ streams collected by an Ettus Research B210 SDR connected to a Septentrio dual-frequency active antenn…
-
At idle, the ZMQ socket will supply ~25,000 empty samples per second, however, when MMDVMHost pushes mmdvm-sdr into tx mode, the samples per second will jump to on average, 1.9 *million* samples per s…
-
I've successfully transmitted a static location, but when I run the following command:
sudo ./tx_samples_from_file --file triumphv3.txt --type short --rate 2500000 --freq 1575420000 --gain 0
I rec…
TDT56 updated
3 months ago
-
Do you see any addition of UHD support for SDR's in the future?
-
## Issue Description ##
After completing the installation of UHD on Ubuntu 22.04 LTS, I was able to successfully run uhd_find_devices. However, when I attempt to use uhd_usrp_probe, I encounter the f…