-
@tomoyanonymous Thanks a lot for this.
Since `brew install flatcam` does not work for me, I tried `brew install flatcam-beta`.
The process ends successfully, but starting the installed result le…
-
Hello,
I haven't been able to solve a problem with cutting a board for 2 weeks. I am working on a project and I went on the road - Kicad - FlatCAM - bCNC. The problem arises at the last stage after a…
-
**Describe the bug**
Flatcam fails to build
**To Reproduce**
With flakes: nix build -L github:NixOS/nixpkgs/b3ea24a4144884ab07ed4b8c48fddf4a292f1417#flatcam
Or build from master.
Or just look a…
-
The autolevel plugin ignores G20/G21 commands, assuming that the input GCode is in mm. I ran output from FlatCAM in inches and caused a machine crash because the offsets were applied assuming mm but m…
-
On Fedora aarch64 when using `make third_party`
```sh
...
-- Installing: /data/jw/or-tools/dependencies/install/lib64/cmake/protobuf/protobuf-config-version.cmake
-- Installing: /data/jw/or-too…
-
Leveling proceeds fine, but at the very end this has happened to me several times already and it seems random:
probed 363/364> 124.558 65.748 -0.020
probed 364/364> 129.748 65.748 -0.035
apply …
-
Hello,
I use VisPy module version 0.8.0, Python 3.9.4, PyQt6 6.1.1 on Windows 10 x64.
I have a problem that may have a easy solution but I can't see it due of not knowing enough of the VisPy and I n…
-
Not sure if I'm doing some order of operations incorrectly, I had 1 decent run and since then cannot replicate. Steps I follow:
Using machine 3018 cnc with Woodpecker 3.4 control board
* Plug in…
-
For starter's I love this program.
It works great with gcode coming from pcb-gcode. But coming from Flatcam its another story.
when you first load the gcode it has a long list of errors. maybe it j…
-
i'm on mojave 10.14.4, and was able to install (despite an issue building the dependency [cartr/qt4/pyside@1.2](https://github.com/cartr/homebrew-qt4/issues/66)) but then when trying to run, got the f…