-
### Version (or build number)
1.0.0
### Steps to reproduce
-Use RetroDriven/Pocket_Updater v1.5.6 to install this core on a formatted memory card
-Run this core from the FPGA menu, as normal, and …
-
1. I have tested it on a Samsung tv HDMI is not recognising and signal is not stable .
However on a hdmi capture card on my laptop the signal is fine .
2. Is there a way to include the code on esp32 f…
-
Is this project still kicking? Is there any desire to port to the Mister project?
-
Reported by @Alex-Kw , an early adopter/beta tester:
```
[10ms] Platform: ZuluIDE RP2040
[10ms] FW Version: 2023.07.26-dev Jul 26 2023 17:08:40
[11ms] DIP switch settings: cablesel 0, drive_id 0…
-
Hello. [An Unstable nightly was just released with a feature that may aid this project greatly.](https://discord.com/channels/647909397477195803/807613978154762252/1089658138854170734) (Link requires …
-
have the project considered port to other architecture?
Motorola 68K 010, 020, 030, 040, 060, 080
big.endian,
Amiga500-2000,3k,4k, AtariST, Apple McIntosh
https://youtu.be/oyR-2HlAkv4?t=448 "pc-…
-
From the chat:
> **tim sherwood** George is working towards an integration with the PyNQ board that will hopefully allow us to run real PyRTL seemlessly on real hardware. I think the plan would be …
abe-k updated
7 years ago
-
In first stage the flying 'dragons' get split quite often.
Check especially between 5-8 sec. in attached video shot.
Using the latest Tecmo_20200810.rbf core.
https://user-images.githubusercont…
-
There should be a README.md explaining what this is, along with setup and usage instructions.
-
Hello, I must say that I've absolutely loved playing my Gameboy games on the TV with an SNES controller.
But I've ran into two issues so far, one that has been consistent for some reason despite tryi…