-
### Operating System
Linux
### Board
n.a.
### Firmware
n.a.
### What happened ?
I'm trying to package tinyusb for inclusion in Debian. I was thus reading through all the copyright of the includ…
josch updated
5 months ago
-
Recently, have started some tests with `regz` using some SVD's such as gd32v (which does not yet have cluster support), esp32-c3 and now [allwinner D1 (unofficial svd)](https://github.com/duskmoon314/…
-
Hi!
I kind of bricked my TFT35 E3 V3.01 (with GD MCU) by using the STM32 and NOT the GigaDevice firmware .bin and flashing via SD-CARD.
It was then stuck with the "illegal APP" Message even after …
-
This issue tracks replacing the [CODEOWNERS](https://github.com/zephyrproject-rtos/zephyr/blob/67151b930a42f791f40363427463f8364b7d05d0/CODEOWNERS#L1) file with the [MAINTAINERS](https://github.com/ze…
-
Hello,
I bought a hoverboard mainboard off ebay in order to use this firmware, hover on arrival I realized that this mainboard seems to be newer and different to the ones currently used.
It featu…
-
# Attempted write
```console
├─ ~ via ❄️ impure (shell)
╰───❯ sudo flashrom -V --programmer ch341a_spi -w ~/Downloads/u-boot-sunxi-with-spl
flashrom v1.3.0 on Linux 6.7.10-xanmod1 (x86_64)
fla…
-
Using the ca8210 driver 1.1.2 release in https://github.com/CreatorDev/openwrt/commits/dev-pistachio-4.4.7 i.e. linux kernel 4.4
After booting up the Ci40, tried ping6 test between two Ci40s.
But obs…
-
Just received a FS2011 from amazon (6/27) and the board revision is the same as your picture, Z27809 but the CPU different:
GD32F150
C8T6
CEHH213
AJ2151
GigaDevice
ARM
After programmin…
-
Is MicroPython supported on this? https://www.amazon.com/gp/product/B09J112YR7/
I can't get it to run... updated to esptool 4.5.1. Mostly boot loops or no serial hardware detected...
-
continued from https://github.com/Candas1/Split_Hoverboard_SimpleFOC/issues/4#issuecomment-1604941688
> In the past, I had problems with SimpleFOC due to the limited speed of the encoder readings. …