-
Can someone tell me step by step, how to make the firmware with the published source code?
-
Hey, nice job converting grbl for mega2560
Is there a posibility to configure grbl to use two stepper drivers for one axis simultaneously (e.g. use E1 of a RAMPS board for Y), so two steppers of a po…
-
I am using only x and y axis.
Grbl 1.1h and Arduino uno R3 atmega328p.
Using Windows 7 32bit or 64 bit.
lasergrbl often showing error detected some problem with your board in the middle of progress…
-
#### Description
Feature Request to add a Widget for use in CNC. Where in the slicer is able to read the gcode for all top most values. Then adjust based actual measured data from supplied stock as…
-
A module to interface to an LCD display, for example:
[Ender LCD Display](https://www.ebay.com/i/254599064474)
It needs 3 input pins for the rotary encoder and its associated pushbutton, 2 outpu…
-
Not sure if it's the correct place to ask since i don't see the library I'm going to ask about here, but hope someone will answer.
I have CNC 3018 machine and using it's laser cutter with Fusion 360…
-
Hi guys,
I can't find any data about wiring, especially for motor pins.
-
Hello, hopefully someone is willing to help me. I recently bought a CNC, finished putting it together, and now ready to design something. This is what it says for me to use, Designed to use GRBL fir…
-
This is just a request, not a bug but I don't see the option to tag it as a request or question. Sorry.
For my actual project, it would be great to have the TRIGGERED_MOVEMENT option, same as teath…
-
*I might be mistaken but I cannot find information on it*
**Please describe the feature you would like implemented**
Request the addition of the option to apply software offset for fixed endstop o…