-
### Version
1.41.0 beta
### Operating system type + version
Windows 10 build 17134
### Behavior
* _Describe the problem_
Volumetric flow rate computations appear to be incorrect.
* _Steps n…
-
### Version
2.2.0+win64
### Operating system type + version
Windows 10 Professional
### 3D printer brand / version + firmware version (if known)
MK3
### Behavior
Using the default Prusa…
-
### Is your feature request related to a problem?
When using the infill steps cura draws some lines on open space
### Describe the solution you'd like
To add an option that forces the new layer to …
-
As a Gcode User I want to can see in readonly mode configuration settings of a Gcode file.
The current status is that appears a message "Print Configuration is disables. You can't modify the GCode …
-
### Version
4db029c
### Behavior
Honeycomb infill bordering on the perimeters draws unsupported lines. This makes these areas have a weak binding to the rest of the infill and to the perimeters.
…
-
Hello Toby !
I'm trying to use PicoGK directly in the Rhino Interface.
My goal is to add a command in Rhino which allows to add Gyroid to a mesh from Rhino using PicoGK.
I discovered your PicoGH…
-
In Issue #310 I am working on importing cross sections directly into Cura sans 3D triangles. By cross sections, I specifically mean 2D X-Y polygons with holes arranged in Z order; each cross section a…
-
It would be helpful with low infill percentages if there were a version of the concentric infill with radial connections between the concentric shapes. I am not a mathematician so refrain from suggest…
-
At long long last -- the issue that I went to all this trouble to report :)
### Description
[Description of the issue]
The same file takes enormously longer to finish meshing on Windows than it…
-
Hi,
When I want to start printing with USB mode, nothing happend on the printer because cura doesn't send any temperature order for the extruder (0°C.
A temperature (205°C) is set for this material …