-
#### Summary
It's a little confusing how ABP frame counter resets behave when "Frame Counter Resets" is enabled. It seems like a device can go from fcnt 0, to 1, back to 0. But a device can n…
-
-
Currently, depending on if a series has been matched in standard mode or multi-episode mode (i.e. tvdb2/3/4 mode), different sources of metadata will be used for each episode's Director and Writer. In…
-
-
Anytime I browse the library and hit new live photos taken with an iPhone, I end up with gray squares, spinners, and then many (4-8?) `ffmpeg` processes start up and completely choke my modest PC home…
-
I tried following the [ToDo Tutorial](https://github.com/nasa/openmct/blob/master/docs/src/tutorials/index.md#to-do-list) but it does not make sense. I saw that #1309 was closed in December but the co…
-
Hi, every now and then I fly and track APRS High Altitude Balloons. Sometimes I connect my Direwolf to my virtual audio card and decode APRS from websdr receivers to check if my tracker shows up there…
zanco updated
2 years ago
-
My motor glider doesn't need motor power to fly at all times, and there are 2 clear cases
1) try to maintain altitude (cruise) but in an updraft
2) RTL or AUTO and above target altitude
Taking the ea…
-
# Best Practices for Naming and Merging PRs
## TL;DR
This RFC was accepted and has been our modus operandi for naming and merging PRs since then. It boils down to three things:
1. Use the [se…
-
In the datasheet for the BME280, it states the pressure range of the sensor is full accuracy 300hPa to 1100hPa, which no doubt is perfectly fine for just about everyone.
Not noticing this on the data…