-
I wonder if the specified ESC current and voltage units are correct.
From `dji_fc_subscription.h`:
```c++
/*!
* @brief struct for status of each individual esc
*/
typedef struct ES…
-
I saw that the original library supports passing on a speed / compression strength option.
It's mainly affects compression speed and has the classic tradeoff between compression strength and cpu cy…
-
Hi
I set step per mm 500 for servo motor.
I have no problem with low speed movements، But if the speed is high, the microcontroller resets،Sometimes it also shows alarm 47.
I sent G01 X5000 F10000 …
-
Hi,
I'm new to OPC UA.
I'm setting up the following configuration for my project :
Telegraf => open62541 server => OPC UA client.
Telegraf updates a set of variables in open62541 server at…
-
Hi,
I used the ConnectYDLidar.ino sketch and im getting unstable readings. "YDLIDAR get Scandata fialed" in between what seem good readings. Do you have some suggestions?
I have an external 5V s…
-
My 2019 Ram 1500 supports wired Android Auto. After connecting my rp zer02w with 8gb card the phone serially connects and disconnects from the AAWirelessDongle wifi and displaces Android Auto connect…
-
Could you do a sample for high speed SPI accelerometer motion classification? IIS3DWB for example.
-
Plane starting to shake when afterburner enabled
-
As it was mentioned in previous issues, there's some ploblems when running test at 1Gbit lines.
For example, I use data sizes 32, 64,128 Mbytes for test, and I get only 200Mbit/s download and same up…
-
### Describe the bug
After updating to version 3.0.0, there is a noticeable slowing down of mouse movement mapping, When attempting to spin Neuvillette at high speeds at aim mode in Genshin, the expe…