-
The current i2c_slave driver API is marked experimental and is generally undocumented. It is also unsuitable for DMA-based solutions like [Nordic SPIS](https://github.com/zephyrproject-rtos/zephyr/is…
-
Booting the GL-AR750, I can see that the gpio-based I2C controller is set up with the expected pins 16 and 17:
```
[ 0.147948] gpio-17 (sda): enforced open drain please flag it properly in DT/ACP…
-
# Software Used
- CircuitPython V3 Battery Board Software
# Issue Description
For some reason after initialization of the PySquared_EPS the I2C devices do not respond in a timely manner. After ke…
-
I am trying use this library with some TI chip. Could you please explain how to use i2c.read(reg,length) to do **Pointer Byte Set Followed by a Repeat Start and Word (Two Byte) Read** as showing in th…
-
Hi,
I'm testing with sdd1306 in I2C on a board with rp2040.
It works well if I use I2C in HW but if I use software mode the display remains black.
I used the sample file attached to the library…
-
Hi, I am using a setup similar to what is described in the README with raspi-io on the remote device. When I try to ead an i2c device I get multiple `READ not implemented yet` messages and finally it …
-
I can use this lcd with U8G2_ST7567_HEM6432_F_HW_I2C u8g2 but cannot use all lcd with res 128x64. Can u expand it please
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I'm running into issues with the PCB 2. I have it all wired up, using USB to communicate with the PI and the XT30 for 24V and GND. I couldn't get CANBUS to work since I already have 2 devices hooked…
-
[Breakout board from SparkFun](https://www.sparkfun.com/products/13762).
- [Datasheet](https://cdn.sparkfun.com/assets/learn_tutorials/5/5/0/MPU9250REV1.0.pdf)
- [Register Map](https://cdn.sparkfun.…