-
### The problem
I am running assist on a RaspiAudio Muse Proto (the config I patched yesterday, with an added switch to debug mute_pinn state, but that is fine now!)
When I use a trigger that ch…
-
Hey, first of all, thank you for the great work you have done!
## Issue
While using a single speaker to play anything from Music Assistant, stream goes file, everything works.
The only missing pi…
-
I've built mainline 5.9 kernel and have only hdmi audio
```
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: hdmisound [hdmi-sound], device 0: ff8a0000.i2s-i2s-hifi i2s-hifi-0 [ff8…
-
Using the ESPHome normal installation with the good, HA entities are appearing, Assist Pipeline is configured, but no response whether holding down the left button to speak or using the wake word.
…
-
Hopefully an easy fix - perhaps https://pinout.xyz/pinout/pcm should also mention the acronym I2S, since I suspect "the I2S bus" is a more common name than "the PCM bus" ?
lurch updated
2 years ago
-
I verified that this program works great on a Jetson Nano with a USB Microphone that has 16bit depth. But, I'm having issues getting it to work with an I2S MEMS Microphone (SPH0645LM4H) that has a bit…
-
I have connected everything according to the code, default pin numbers et.c. I can see that data is being received from the mic and being sent. The receiver receives data, but I can only hear a tickin…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
when no input channel is connected to add, what is the adc output on data pin in case of both tdm and i2s mode
-
**Describe the problem you have/What new integration you would like**
I would like an option to be able to specify the sample rate for the I2S microphone component in the YAML in the same fashion…