-
-
-
Issue imported from https://tracker.freecad.org/view.php?id=4269
* **Reporter:** wucke13
* **Date submitted:** 2/18/2020
* **FreeCAD version:**
* **Category:** Feature
* **Status:** assigned
* **Tag…
-
@kkaempf
Configure green lines for Mark (weak laser power and fast move, to scratch only the surface)
Configure red lines for Cut (strong and slow)
Load an svg that uses both, e.g. the attached h…
-
Vielleicht auch schöner im DNS, analog zur Camera?
-
After changing to the new native-api, I can't change the values in the light component anymore. I can switch the state but all values will be at 255. They are not writeable. See the picture below.
…
-
**Describe the bug**
On the Device Types page, I have 4 devices setup:
CNCMachine1
LaserCutter
WaterCutter
smart-home
I want to delete CNCMachine1, and when I click the **Delete** button on th…
-
Freely discuss your opinions on an ARM platform for Grbl, moving forward after v1.1.
-
Grbl now (v1.1) has a very nice feature in the laser mode:
If you turn on the laser with "m3", it runs at the power specified by the Sxxx command
BUT if you turn on the laser by issuing an "m4", the…
W-E updated
11 months ago
-
Is there a log of what was sent to the laser cutter?