-
After #51669 is merged, I plan to write documentation for it, and try to update/rewrite a bunch of our existing module-related documentation. While there are a lot of good examples in this issue track…
-
When I tried to make a thread using ioSender, I got Error:41 on G76 command.
To make it work I have to do couple things:
- in function spindle_on() comment out spindleDataReset() - with this call …
-
Hi,
I really appreciate your work on this great project. I am going to use this project in combination with the BTT Octopus PRO board to drive my converted lathe. I have an optical encoder with 500…
-
Hello Terjeio,
I continue my work to create a mainboard from blackpill and I test all fonctions available on this target.
When I enable spindle_sync, all is OK, but when I set PPR to 600, because …
-
I'm having an issue with a cnc lathe, where the homing cycle doesn't finish after x first finds the limit switch.
The weird thing is it'll do each axis individually ($HZ and $HX) correctly, but the …
-
I previously remarked (web builder discussion) about how I've noticed G93 does not seem to vary speeds as expected. For example F15 and F12000 seem to have about the same speed.
I am testing these…
-
Using the latest release, 2.0.41, when I enable the lathe mode and restart the app, the DRO axes that display are X and Y instead of X and Z.
Also, the DRO always shows to be in radius mode even w…
-
[see LCNC forum post for initial discovery: [https://forum.linuxcnc.org/24-hal-components/48045-carousel-comp-counts-mode-bugs-error](url)
- 18-pocket ATC, controlled using carousel.comp
- carouse…
-
Hi.
I did "git pull" to get the updated files from 11-add-external....
then installed the new drivers "litexcnc install_driver"
rebuild the firmware.
Then LinuxCNC won't start anymore.
[linux…
-
## Here are the steps I follow to reproduce the issue:
100 line single channel encoder with 1 missing tooth.
1. I don't know how to create a simple config to show this
2. I have a 100 line en…