-
-
MEGA 2560 board with 3.5" TFT LCD Shield driver ili9481 no touch screen. User_setup.h uncommented for #define ILI9481. Sketch uploading successfully. Serial monitor on and displaying test data but scr…
-
```
Hey, I wanted to use this lib with my LCD Keypad Shield
The Keypresses are separated by voltagedividers.
So I just wanted to attach a interrupt on the analog pin thats used by the
keypad shield…
-
```
Hey, I wanted to use this lib with my LCD Keypad Shield
The Keypresses are separated by voltagedividers.
So I just wanted to attach a interrupt on the analog pin thats used by the
keypad shield…
-
```
Hey, I wanted to use this lib with my LCD Keypad Shield
The Keypresses are separated by voltagedividers.
So I just wanted to attach a interrupt on the analog pin thats used by the
keypad shield…
-
```
Hey, I wanted to use this lib with my LCD Keypad Shield
The Keypresses are separated by voltagedividers.
So I just wanted to attach a interrupt on the analog pin thats used by the
keypad shield…
-
I am trying run the V2 with an STM32F429I processor on an ST neucelo dev board. The h/w appears to be working individually for the SPI bus to the V2 chip, LCD controller and the SD card. The sketch re…
-
I have 3.5" UNO Module which I would like to use together with ArduinoMenu. I did find [MCUFRIEND_kbv](https://github.com/prenticedavid/MCUFRIEND_kbv ) library.
How can I use this lib?
Board: Ardu…
-
Hi,
I tried to flash (with ESP-Flasher-Windows-x64) the homepoint_aztouchmod_full.bin to my ESP32-WROOM.
This is the Log:
Using 'COM4' as serial port.
Connecting....
Detecting chip type... ESP…
-
Hello.
I am working on a project which reads data from an attached GPS module, calculates various date/time values, displays this on a local display (4x20 LCD) and also transmits some of this infor…