-
Hi dude, thx for this awesome lib.
At this moment I am trying to make cortana works with a simple rgb led stripe, I developed the hardware by following the simple mode in [this tutorial](http://www…
-
WS2812B flicker, WS2812 not.
I am facing a big issue when switching from WS2812 to WS2812B !
My configuration :
• IOT application, 6000 loc, including FASTLED 3.1 and AsyncWEBServer
• WS2812, …
hmiez updated
7 years ago
-
Hi,
I am running just a simple code using Fastled 3.0.3. to control a single WS2812B LEDstrip (60 LEDS) on a Arduino Mega 2560, it works perfectly.
My goal is to run 10 LEDstrips with 10 different a…
-
Hi There,
I connected a RGB LED strip to my raspberry and am trying to control the Red line using the awsome Pi-Blaster. Unfortunally my LED strip is not being stable: it keeps looping from on to off.…
-
Hi there!
I am creating code for my esp12 using arduino,
and your library to address ws2812 ledstrips.
it is connected to pin 14.
when i comment strip.show() my html shows and the esp12 doesn't crash…
-
I'm having 'curious' issues with my 72 led ws2812 ledstrip.
It works at first, but after a few (0 to 5 so far) writes it stops working: leds go all off and nothing can turn them back on. Not even rebo…
-
Hello,
Currently I'm running into the following problem. I am working on a project in which a Arduino Mega 2560 is controlling 9 led strips/rings. They are all controlled independent with pins 33 til…
-
I have 2 ledstrips with each 8 leds.
I want to configure led 0,7,8,15 as corner indicator and remaining as ring.
if i wire whole 16 led at top line of the grid the indicator leds for pitch and roll se…
-
Great js!
when are you planning to upgradethese for RGBW
SET COLOR TO WHITE (GROUP ALL) 0x42 100ms followed by: 0xC2
SET COLOR TO WHITE (GROUP 1) 0x45 100ms followed by: 0xC5
SET COLOR TO WHITE (GROU…
-
How can I use more than 115 leds in WS2811/12 ledstrips?
That's the maximum I can control when using the library.
I really appreciate if anyone can help with some tips on this.
I had the same problem …