-
Hello,
i've upgrade 12 ATC device with your zigbee firmware perfectly for about 4 months now.
Suddenly, on of my device stop reporting. The value is always 24.11° and 63.11% for humidity.
On the …
sybux updated
1 month ago
-
It is often confusing when upper and lower cases are mixed in indexes or carrier names.
I would suggest to consistently use only lower cases in all component indexes and carrier names. For all end…
-
```
What steps will reproduce the problem?
1. Use example code GSM_GPRSLibrary_SMS
2. Remove the commends that will send the sms in setup
3. use valid phone number
What is the expected output? What d…
-
```
What steps will reproduce the problem?
1. Use example code GSM_GPRSLibrary_SMS
2. Remove the commends that will send the sms in setup
3. use valid phone number
What is the expected output? What d…
-
To reduce Power usage even more, the microprocessor will be put to sleep when not in use only to be awaken on a key press, such as the "C" key on the keypad. If power usage is reduced to a great enou…
-
The problem with most MPPT chargers is that when they read the battery voltage they don't turn off the background charging current. This results in an elevated voltage reading on the line and messes t…
-
L'alimentazione deve garantire alla ninfea un certo grado di autonomia.
motori, LED e comunicazione IR devono consumare lo stretto necessario.
Usare **pacco batterie AA** oppure **batterie al liti…
-
Hv batteries are always more than 24 cells in series. How did you get it to work with the BMS when it only have 24 outputs for cell balancing? Did you use active balancers and how did you wired them i…
-
Hello,
following [docs](https://thesofproject.github.io/latest/getting_started/intel_debug/suggestions.html#es8336-support) and [wiki](https://github.com/thesofproject/linux/wiki/ES8336-support) I'…
-
For now each device is powered with 3xAA alkaline batteries, maybe a 3.7v lipo rechargeable battery would be better.
Pro :
- rechargeable
- open the road to arduino pro mini 3.3v (Logic level shi…