-
Hi, @14yannick!
Thanks for all your hard work - much appreciated. Honestly!
However, being a fresh house owner & HA fan, I struggle with finding solid answers to these 2 questions:
## 1. Upgrad…
-
ESP8266 running LeafMiner v0.0.14, connected to pool.vkbit.com. Miner is connected, it receives tasks from the pool. I cannot see miner at the pool. I connected miner to PC and I monitor console. I ha…
-
[TouchIntErrorProjectArduino.zip](https://github.com/user-attachments/files/15823273/TouchIntErrorProjectArduino.zip)
-
### The problem
When I add the CAM32 component to my board yaml (see below) I get into a bootloop. Loggings can be found below.
Using the SSD1306 display which is also on the board without the camer…
-
apa102 module is not available in firmware.
Uploading a generic Dotstar driver (https://github.com/RobertJBabb/micropython_generic_apa102/blob/master/generic_dotstar.py) allows the LED to be access…
-
I've been struggling for a couple of days now to make the Lilygo S3 work with the code. This device should be fairly similar to the configurations for the BOARD_HOMBERGER or the PLATFORM_BOARD_NODEMCU…
-
Hi, I'm stucked with this board, any help would be appreciate.
I've just bought 2 of thie tiny display from Ali, I've downloadad this repo and just tried to compile any of the samples to no avail.…
-
**Describe the problem you have/What new integration you would like**
The m5dial uses a GC9A01 screen with a FT3267 touch driver. I have been able to integrate the display using an external compo…
-
Hello, thank you for creating this library.
I've been using this library with ESP-IDF v4.4 in a project for a while. But when I upgrade to the ESP-IDF version v5.1, the compilation gives the follow…
-
Add low power modes to CO2 Gadget,
Starting with SCD41 sensor (not too expensive and widely available).
Nothing too complex but with different low power modes the user can select in preferences:…