-
I'm guessing the mv needs to be µV.
The offending lines:
https://github.com/open-ephys/bonsai-onix1/blob/634a54c3268c65215c734e8fbbb2dcf87215bee3/OpenEphys.Onix1/Rhs2116DataFrame.cs#L48
https://…
cjsha updated
4 weeks ago
-
platform.txt contains:
```
# fixed registers: r4 = isr_tmp, r3:r2 = WDT counter for millis
#compiler.optimize_flags=-Os -flto -fno-move-loop-invariants -fno-reorder-blocks -ffixed-r2 -ffixed-r3 -ff…
-
According to https://www.arduino.cc/reference/en/language/functions/time/millis/ the value returned by millis will overflow after about 50 days.
On this page:
https://playground.arduino.cc/Code/Si…
-
Changing the dataset saving procedure from currently beeing "numeric" to "array" should save the data as a binary blob instead of each individual point as numeric float. This should speed up saving (f…
-
I ran the following simple example with maraboupy:
```
from maraboupy import Marabou
from maraboupy import MarabouCore
from maraboupy.Marabou import createOptions
inquery = MarabouCore.InputQ…
-
This was tested on a Adafruit QT Py with a CH32V203G6.
When a hardwareTimer is set up to generate both rollover and channel interrupts, execution sometimes freezes. This is due to both the interna…
-
**Problem description**
On Android 14, `termux-usb -r` responds very very slowly.
**Steps to reproduce**
As the console log shown below: When I entered `termux-usb -r`, it showed the …
bczhc updated
6 months ago
-
After the alarm controller has been switched on for 2^32 milliseconds (about 49 days) the `millis()` will wrap around.
The behaviour of the unit will be unpredictable when this happens. At present …
-
[This](https://github.com/jrullan/neotimer/blob/master/src/neotimer.h#L138) is how it is determined that the time interval has expired. I am uncertain whether that will behave correctly when `millis` …
-
CREATE OR REPLACE FUNCTION utcmillis (in db2ts timestamp)
returns bigint
language sql
deterministic
no external action
return (
bigint((days(db2ts - current timezone) - days('1970…