-
**Description**
When using FUXA with Modbus devices, data cannot be received by FUXA. This was tested for two different devices, resulting in _readMemory CRC errors for one, and both CRC errors and …
-
Is it possible or will it be possible to write to the inverters modbus registers?
I want to be able to write to: 212 - BATT CHARGE LIMIT CURRENT
Is this in theory possible over the used TCP connec…
-
Due to the lack of free UART ports in my setup, I must provide support for running MODBUS over the SPI interface.
It looks like this is possible in principle, but no opensource solutions for MODBUS…
-
Hi
Is it possbile to make it run using an ethernet to serial ( MOXA )? will it work with the old version of koolnova 100-cpnd00?
thanks in advance
-
Hi.
I have a setup with a Growatt Shinemaster.
It's a Modbus collector for up to 64 devices.
My problem is, when I want to setup my DTSU666, the connection can't be established.
I realized that …
-
Hello, the solaredge modbus works most of the time perfectly. But in case of an network connection error on the solaredge inverter the webinterface from Home assistant stops working. When i reboot hom…
-
Hallo ich stehe vor einem sehr seltsamen Problem. Zu 80% der Zeit stimmen alle Werte und das Skript funktioniert nur teilweise stimmen die Gridzählerdaten überhaupt nicht, dadurch stimmen dann natürli…
-
## Version of the Custom Component
v.1.10.0b4
## Configuration
```yaml
Standard install - H1-5.0-E Inverter connected via Ethernet
Master Version: 1.48
Slave Version: 1.02
Manager V…
-
Dear asillye, the current scripts do now allow to control the bypass status, something that would be great to control to increase efficient ventilation in summer time.
The modbus commands are no long…
-
Hi, any ideas what other devices than `/dev/usb/hiddev0` would need to be handed over to the container when trying to use modbus?
I am constantly getting `COMMLOST` when running in docker. If I insta…