-
This is the new JK BMS: https://www.jkbms.com/product/jk-pb2a16s15p-jk-pb2a16s-15p/
It has a comms board with 5 ports:
1 RS485 ((RJ45) to be connected to Inverter
1 CAN (RJ45) to be connected t…
-
I cant install, the Raspberry Pi Zero W21 freeze up during install..
Dont know why. Noticed that CCL took 100% CPU for a long time now and then during the install.
All I need is just get CLI dat…
-
I am trying to interface from an Arduino Uno (Master) with the EPS 2.0 board (Slave) via I2C. I have flashed the firmware, located on the spacelab-ufsc/eps2 GitHub page, to the EPS 2.0 MCU using the p…
-
Hi, any chance of some instructions on how to run ipctool from an sdcard, serial connection or from micro USB? Im having trouble setting up a tftp connection.
-
$ mpp-solar
Exception ignored in:
Traceback (most recent call last):
File "/home/danny/.local/lib/python3.9/site-packages/paho/mqtt/client.py", line 874, in __del__
self._reset_sockets()
…
-
Could there be a simpler installation guide?
grydo updated
6 months ago
-
Hello,
Is there any chance to add Heltec/Neey balancers over BLE ? As far as i know ESPhome already support those devices:
https://github.com/syssi/esphome-jk-bms/blob/main/components/heltec_balance…
-
Hello,
Great project! I'm new to this so please excuse my lack of knowledge.
Is it possible to use this to add MPP Solar inverter and JKBMS compatibility to Victron VenusOS and/or Home Assistant run…
-
Just confirming the software works for the above hybrid inveter using PI30 if you want to add it to the list.
Niggle about installation though the pip install mppsolar seems to install into a hidde…
-
Hi
Trying
```sh
mpp-solar -p 20:21:11:28:15:EF -P JK02 -c getCellData --tag solar/lutsk/jkbms100 -q 127.0.0.0 -o mqtt
```
And getting
```
Traceback (most recent call last):
File …