-
Hi,
I'm looking at utilising the interrupt pin on the MPU6050 on the Wokwi simulator, & was wondering how I can go about activating the INT pin?
-
Hi Kris,
Thanks for the great code. I have managed to obtain the accelerometer and gyro datas, however my magnetometer datas give out only zero values. When I run the code, I managed to get the out…
-
I am using the MPU 9250 with the Arduino Pro Mini.
MPU9250
9-DOF 16-bit
motion sensor
60 ug LSB
This is all I see on the serial monitor. I don't understand what is wrong as nothing else is bein…
-
Hello Kris, first of all congratulations on all your work, it is simply amazing.
I am trying to synchronize two MPU-9250 in order that at any time I can know what is the difference in angles betwee…
-
Currently the `code_relocation` sample use registers not present in armv8 devices when `CONFIG_ARM_MPU` is enabled:
```
for (index = 0U; index < 8; index++) {
MPU->RNR = index;
if (MPU->RASR …
-
I'm using the official preference library to store some caliburation data of mpu 6050 , but the preference lib is returning errors, don't know how to fix, tired to change the platform from default esp…
-
**_Reported by Andrew Boie:_**
This task is for devices with an MPU that requires memory regions to be power-of-two sized, and aligned to their size.
We have some discrete memory areas:
* ROM (…
-
Hi Kris,
Thanks for the excellent resources you have made available for the MPU9250.
I'm trying get the MPU9250 to work on a custom board running FreeRTOS with a STM32F7x.
The driver I'm using…
-
Hello,
I am running the python program for the MPU-9250.. Below is the output, but how do I calibrate the MPU ? Please provide exact code for this. I do not have the FaBo9Axis-MPU9250, but just the M…
-
I'm working on a project based on the NXP [K20 series](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-…